Specialties - Metal removal fluids
- Water soluble mineral oil based cutting Oils
-
Servocut ClearServocut Clear gives a transparent type of emusion moreServocut Clear gives a transparent type of emusion with water and offers the advantage of visibility during machining. Servocut Clear provides excellent cooling and lubrication at chip/tool interface ensuring long tool life and improved suface finish. It is recommended for multi-tool set-ups in profile grinding, where the stable emulsion enables cutting tools to perform satisfactorily. This product offers better scope for manufacturing components to the correct dimensional tolerances. Servocut Clear meets IS:9611-1980 specification (Reaffirmed 1998). hide
-
Servocut SServocut S is soluble type high quality cutting oi moreServocut S is soluble type high quality cutting oil, which yields rich milky emulsion with water. Special emulsifier is incorporated to ensure its complete dispersion in water. The emulsion formed is homogeneous and stable in nature and does not split during usage or routine machine shut down periods, under normal conditions. Servocut S contains rust inhibitors, which impart anti-rust and anti-corrosive properties to the emulsion. Carefully selected biocide is incorporated to prevent bacterial growth in the emulsion. Servocut S is recommended for variety of cutting operations on ferrous and non-ferrous metals. Servocut S meets IS : 1115-1986 (Reaffirmed 1996) specifications. hide
-
Servocut SuperServocut Super is a superior quality soluble type moreServocut Super is a superior quality soluble type metal working fluid, which torms stable translucent milky white emlusion and provides longer emulsion life. Servocut super gives excellent surface finish and extended tool life. It is recommended for a variety of cutting operations on ferrous and non-ferrous metals. It possesses better low temperature flow properties and provides enhanced corrosion protection to ferrous metals. The emulsion is stable even at 30:1 dilution. hide
-
Servocut EPS 452Servocut EPS 452 is a long life, bio-stable and EP moreServocut EPS 452 is a long life, bio-stable and EP (Extreme Pressure) type water miscible high performance cutting fluid. It is suitable for severe cutting operations on non ferrous metals like aluminum, aluminum alloys, copper and also for ferrous metal applications like cast Iron(CI), mild steel(MS), alloy steel etc. It contains chlorine additives and is free from boron, nitrite, etc. It withstands high water hardness of 600 ppm and is suitable for centrally managed sumps. hide
-
Servocut AL 23Servocut AL 23 is a long life & bio-stable fluid f moreServocut AL 23 is a long life & bio-stable fluid for cutting application of non ferrous metals like aluminium, aluminium alloys, copper. It is also suitable for ferrous applications like cast Iron(CI), mild steel(MS), alloy steel etc. It does not contain chlorine additives and is also free from boron, nitrite, etc. Servocut AL 23 can perform in all cutting applications such as milling, turning, drilling, boring etc. on aluminium alloy components. It can withstand high water hardness of > 700 ppm and has an excellent control over bacterial growth thus providing long sump life. hide
- Neat Cutting Oil
-
Servocut 51Servocut 51 is a non-staining type neat cutting moreServocut 51 is a non-staining type neat cutting oil recommended for machining ferrous as well as non-ferrous metals and for repetative machining operations of less severe nature on automatics. Servocut 51 maintains light colour during service providing good visibility of machining operation and meets IS:3065 - 1985 (Reaffirmed 1995) Type 1 Grade 2 specification. Servocut 51 is also recommended for free cutting on mild steel, which involve high spindle speeds and short cycle time, particularly on screw automats, capstan or turrel lathes. Because of its non staining nature, it can also be used for machining copper, brass or alloys containing zinc. hide
-
Servocut 151Servocut 151 is a superior quality neat cutting oi moreServocut 151 is a superior quality neat cutting oil recommended for a variety of machining operations on both ferrous and non-ferrous metals. It is suitable for automatic and multi-tool lathes handling high tensile steels. It can be used for such specialised applications as thread-grinding, form-grinding and milling set-ups using multiple cutters. It contains chlorinated compounds which impart EP property to the oil. The use of this cutting oil provides improved machinability without the risk of discolouration of components and avoids premature regrinding of cutting tools. Under selected conditions of speed and load, it can be used for machine tool lubrication also. Servocut 151 (CF) is eco-friendly cutting oil free from chlorine. hide
-
Servocut 201Servocut 201 is sulphurised fat containing neat moreServocut 201 is sulphurised fat containing neat cutting oil specially developed to cover a wide range of machining operations. It aids in obtaining good surtace finish and protects tools from excessive wear. This product is particularly suitable for machining operations of repetitive nature on small automatics. Servocut 201 meets IS: 3065 - 1985 Type 2 Grade 3 specificiation. This oil is recommended for all machining operations on ferrous and non-ferrous metals, where severity is not high. hide
-
Servocut 245Servocut 245 is a non staining EP type neat cuttin moreServocut 245 is a non staining EP type neat cutting oil containing Chlorine & inactive sulphur for application in deep hole drilling & honing applications on non-ferrous metals. The product has excellent swarf removal & flushing characteristics, other than its very good extreme pressure properties. hide
-
Servocut 375Servocut 375 is a specially formulated low visco moreServocut 375 is a specially formulated low viscosity neat cutting oil recommended for moderate to heavy duty cutting operations like gear hobbing, gear shaving, deep hole drilling, boring etc. It has synthetic ester, active sulphur and chlorine in optimum levels for sustained performance in heavy duty cutting operation. Servocut 375 forms boundary lubricating film at tool-chip interface and reduces frictional heat. The oil has minimum mist forming tendency. hide
-
Servocut BRServocut BR is a special purpose non-staining ty moreServocut BR is a special purpose non-staining type neat cutting oil having very high oiliness property. The oil has excellent foam release ability and its use prevents overheating of work-piece thus eliminating chances of metal distorion. Servocut BR is recommended for flute grinding of drills, reamers and various types of form grinding tools, which involve critical metal grinding processes. This product is also suitable for gear cutting, hobbing and high speed metal working operations on automatics. It can be used on both ferrous as well as non-ferrous metals. hide
-
Servocut ANCServocut ANC is non-staining inactive type cutting moreServocut ANC is non-staining inactive type cutting oil recommended for flute grinding of drills, reamers and various types of form grinding tools, which involves severe metal grinding process. It is ideally suited for gear cutting, hobbing and high speed metal working operations. Servocut ANC can be used on both ferrous and non-ferrous metals. hide
-
Servomet 033Servomet 033 is a low viscosity non-staining typ moreServomet 033 is a low viscosity non-staining type neat cutting oil for general machining of aluminium alloys, magnesium and brass. It has excellent heat transfer properties to cool effectively under high speed condition. It is specifically recommended for deep hole drilling and similar operations of non-ferrous metals where the oil is fed under pressure to the cutting area to wash out swarf and debries. It is also suitable for lubrication of spindle drive cam cases. Servomet 033 can also be used in certain free machining operations of ferrous metals. hide
-
Servocut LPServocut LP is a general purpose non-corrosive typ moreServocut LP is a general purpose non-corrosive type neat cutting oil, developed for light duty cutting operations like drilling, milling, grinding etc. Servocut LP has inherent oiliness property to reduce friction. The use of higher boiling basestock in the oil helps in reducing the evaporation rate and thereby bringing down the cutting oil consumption considerably. hide
-
Servocut GRServocut GR is a special purpose neat cutting oil moreServocut GR is a special purpose neat cutting oil of non-corrosive type, developed specially for granite cutting. It helps in keeping the work piece and cutting tool at lower temperature and avoids over heating. It ensures longer tool life and provides superior surface finish. Because of high IBP, the oil consumption is considerably lower. hide
-
Servocut 253Servocut 253 contains special fatty material and a moreServocut 253 contains special fatty material and active sulphur to provide extra cutting assistance under continuous long work-cycles. It has minimum mist forming tendency when used in high pressure coolant fed systems. The use of Servocut 253 optimises filter life due to its low sludging tendency at operating temperatures. It is recommended for deep hole boring, deep hole drilling including gun drilling and trepanning operations where pressurised coolant system is employed for easy swarf removal and effective cooling at the cutting point. It also provides satisfactory performance in deep hole boring of stainless steel. Servocut 253 is not recommended for use on non-ferrous metals. hide
-
Servocut 335/345Servocut 335/345 contain sulphurised and chlorinat moreServocut 335/345 contain sulphurised and chlorinated additives which enable the use of these oils for extreme pressure at low or moderate temperature cutting operations where feed rates are high but speeds are low. Servocut 335/345 provide excellent performance in all machining operations on non-ferrous metals such as gear hobbing, gear shaving, screw cutting, tapping, milling, reaming etc. and they do not discolour the components. These can also be used for machining of ferrous metals where the severity of operation is not high. hide
-
Servocut 353Servocut 353 is active sulphur- chlorinated type c moreServocut 353 is active sulphur- chlorinated type cutting oil which is used for machining of indicate shapes with high precision. It is a low viscosity product designed specially for arduos operations such as deep hole drilling and deep hote boring where pressurised delivery of the cutting fluid is required to clear fine swarf effectively. it is suitable for cutting of terrous and ferrou alloys only. it is also suitable for certain honing operations. hide
-
Servocut 355Servocut 355 is neat cutting oil containing sulphu moreServocut 355 is neat cutting oil containing sulphurised fat, besides active sulphur and chlorinated additive. It is developed for servere metal cutting operations including gear cutting, broaching and threading of alloy and stainless steel. This oil provides a lubricating film, which resists cutting stresses and gives very good surface finish and long cutting tool life. Servocut 355 meets IS:3065 - 1985 Type III Grade 2 and is recommended for ferrous metals. hide
-
Servocut 945/945ASerocut 945/945A are active type neat cutting oils moreSerocut 945/945A are active type neat cutting oils and contain suiphurised fatty material and free sulphur to give better surface finish and longer cutting tool life over a wide range of operating temperatures. These oils are recommended for most of the cutting operations on ferrous metals under severe operating conditions, which demand high degree of chemical activity in oils. These oils are suitable for machining operation of high tensile stainless steel as well as nicket-chromlum alloys on automats, gear cutting, hobbing, drilling/reaming and thread cutting machines. Use of these oils should be avoided on non-ferrous metals. Servocut 945A contains a higher dosage of sulphursed fat for improved surface finish and tool life and meets IS:3065-1985 (Reaffirmed1995) Type 3 Grade 2. hide
- Spark erosion fluids
-
Servospark oilsServospark oils are used as the working fluid in e moreServospark oils are used as the working fluid in electrical - discharge machining (EDM), also called spark erosion machining. These oil have the ability to provide uniform insulation and then to permit controlled electrical discharge at the breakdown voltage. Servospark oils also have the proper balance of viscosity, volatility, oxidation stability, heat transfer characteristics and low odour and toxicity. These properties enable Servospark oils to function as an insulator between tool and work-piece, a spark conductor, a coolant and a flushing medium for chip removal. hide
- Strip grinding oils
- Broaching Oils
-
Servocut BR 16Servocut BR 16 is a heavy duty neat cutting oil fo moreServocut BR 16 is a heavy duty neat cutting oil for broaching application. This oil provides superior lubrication for high stock removal during cutting operations. The Extreme Pressure (EP) and Anti Wear (AW) additives ensure smooth operation, longer tool life and excellent surface finish of the workpiece after the broaching operation. The oil ensures lower coefficient of friction at tool-workpiece interface and thus effect superior cooling. These characteristics ensure quick dissipation of heat from work-piece and tool surfaces. hide
- Neat cutting oil-cum-Hydraulic oil
-
Servohycut DP 146Servohycut DP 146 is a dual purpose oil for use in moreServohycut DP 146 is a dual purpose oil for use in Gear Hobbing machine as cutting oil as well as hydraulic oil. The same oil is ideally suitable for severe cutting operations such as gear cutting, hobbing, broaching, threading etc on high alloy steel and is also recommended as hydraulic oil in the gear hobbing machine. The oil is having adequate viscometrics, high viscosity index, superior anti-rust and anti-corrosive properties with excellent cooling efficiency and load bearing capability to work as dual purpose oil. This type of oil is suitable in such Gear hobbing machines where hydraulic oil leakages in to the cuttting oil system cannot be avoided. hide
- Water soluble synthetic cutting Oils
-
Servosynth oilsServosynth products are water soluble synthetic gr moreServosynth products are water soluble synthetic grinding fluids. The solutions prepared from these fluids are fully clear and free from any oil or fatty matter. These products have remarkable antirust property. Servosynth 5 contains a special chemical inhibitor, which protects cuprous metal components of machines tools. Servosynth 2 is of a special value when grinding open grain cast irons, which tends to rust quickly after being machined. These fluids are not recommended for machining of non-ferrous metals. Servosynth fluids meet IS:11186-1985 specification (Reaffirmed 1995) hide
-
Servosynth NF 15Servosynth NF 15 is a water soluble synthetic cutt moreServosynth NF 15 is a water soluble synthetic cutting fluid. The solution prepared from this fluid is fully clear with greenish fluorescence and free from any oil or fatty matter. The product has remarkable antirust & anticorrosion property. Servosynth NF 15 contains a special chemical inhibitor, which is free from Nitrite & Amine. It is recommended for cutting of ferrous metals, high nickel and titanium alloys. hide
- Water soluble semi-synthetic cutting Oils
-
Servosynthcut oilsServosynthcut oils are Bio-stable Semi-synthetic C moreServosynthcut oils are Bio-stable Semi-synthetic Cutting fluids for cutting and grinding application of cast Iron(CI), mild steel(MS), alloy steel etc. These are high performance water miscible metal working fluids which do not contain any chlorine and are free from nitrosoamine, nitrites etc. They have excellent swarf removal and flushing characteristics. Servosynthcut oils are recommended for grinding and cutting operations on ferrous metals in water-mix form at concentration levels of 2-4 & 3-5 (% v/v) respectively. hide
- Honing Oils
-
Servohone 7Serohone 7 is a low viscosity mineral oil speciall moreSerohone 7 is a low viscosity mineral oil specially developed for honing operations. It has extra fluidity to ensure quick and thorough flushing action and provides very good surface finish. It also gives long life to the honing stones. Apart from all type of surface finishing operation Servohone 7 can also be used in low severity machining operation such as grinding, turning etc. It is widely used for honing of ball bearing races and is ideal for super finishing operations, even on hardened metals. hide
-
Servohone 7 XL oilsServo Hone 7 XL is a chlorine free low viscosity, moreServo Hone 7 XL is a chlorine free low viscosity, high performance oil specially formulated for honing operations. It is suitable for severe application as well as super finishing operations. It can be useful in operations such as turning, drilling & tapping of aluminum alloys and certain machining operations on ferrous metals. The oil has high EP properties & contains a ester making it suitable for honing of both ferrous & non-ferrous metals. hide